Customer Service 908-368-1025
︱
www.modwayfurniture.com
Page 2 of 3
EEI-2278
SWING CHAIR
STEP 1:
Ax6
Bx6
Cx2
Dx1
Ex1
Hardware & Tool required
Please put all chair parts
on a carpeted or padded area, find hardware package inside of the tube on
Left Leg (1)
and
Right Leg (2)
.
Attach
Bottom Stretcher (3)
to
Left Leg (1)
and
Right Leg (2)
as shown.
Secure by using 2 pieces of
Bolt (A)
with 2 pieces of
Nut (B)
.
Use
Allen Wrench (D)
and
Open Wrench (E)
to tighten
Bolts (A)
and
Nuts (B)
clockwise until secure
.
STEP 5:
Hang
Basket Frame (7)
to
Top Stretcher
(4)
by using 2 pieces of
Spring (C)
as shown.
Place
Cushion (8)
and 2 pieces of
Pillow (9)
to
Basket Frame (7)
as shown.
Place
Canopy Cover (10)
to
Canopy
(6) as shown.
Insert
Stand (5)
into
left Leg (1)
and
Right Leg (2)
as shown, secure by using 2 pieces of
Bolt (A)
with 2 pieces of
Nut (B)
.
Use
Allen Wrench (D)
and
Open Wrench (E)
to tighten
Bolts (A)
and
Nuts (B)
clockwise until secure
.
STEP 2:
Insert
Canopy (6)
with adjusters into
Top Stretcher (4)
as shown.
STEP 4:
STEP 3:
Attach
Top Stretcher (4)
to
Stand (5)
at two sides as shown.
Secure by using 2 pieces of
Bolt (A)
with 2 pieces of
Nut (B)
.
Use
Allen Wrench (D)
and
Open Wrench (E)
to tighten
Bolts (A)
and
Nuts (B)
clockwise until secure
.
