User Instructions
Modulift UK Ltd tel: +44(0)1202 621511 email: [email protected] www.modulift.com
The CMOD 8-Point Spreader Frame is modular in span and every frame consists of 4 Corner Units and
4 T-Pieces with intermediate Struts that can be bolted into the assembly to achieve different spans.
●
●
Personnel using this system should be suitably trained, competent and have a clear
understanding of Safe Slinging procedures.
●
●
The use of Modulift equipment must be in accordance with the procedures laid down in
‘Lifting Operations and Lifting Equipment Regulations 1998’ (LOLER).
●
●
Never exceed stated WLL
– Adhere to WLL in Table 2 for particular sling angle used.
●
●
The top sling length is critical to the safe use of the frame
– Ensure you refer to the correct table.
WARNING!
β = Sling to
vertical angle (STV)
Span
β
P1
P2
P2
Fig. 1 – Typical CMOD 8-Point
Spreader Frame Assembly
P9
P8
P7
P3–P6
P3–P6
CMOD 50: 8-Point Frame
CMOD 50: 8-Point Frame has an assembled span up to 15m x 11m.
CMOD 50: 8-Point Frame Specification
●
●
Rated at a maximum of 60 tonnes WLL.
Please see Table 2 for WLL at specific spans.
●
●
‘Sling to Vertical’ angle, β, 45 degrees or less.
●
●
Corner Units and T-Pieces rated at 15 tonnes
WLL each (60 tonnes combined capacity).
●
●
Bolt tightening torque: 150Nm. Spanner size required: 30mm.
●
●
Recommended additional equipment: Torque Wrench, Podger Spanner and Ring Spanner.
Table 1 – Component List
Part Ref. Description
Weight/item
P1
Corner Unit
(
length 0.5m each)
150kg
P2
T-Piece
(
length 0.75 x 0.5m each)
175kg
P3
4.0m Strut
140kg
P4
2.0m Strut
82kg
P5
1.0m Strut
53kg
P6
0.5m Strut
38kg
P7
35t Shackle
20kg
P8
25t Shackle
14kg
P9
M20 x 65, Grade 8.8, HT Bolts, Nuts & Washers
Strut
T-piece
Corner
Unit
Assembled
Frame
