2
•
Battery posts may have acid corrosion. DO NOT get corrosion in your eyes. Avoid touching eyes
while working near battery.
•
In very cold weather a discharged battery may freeze. NEVER charge a frozen battery. Gases may
form, cracking the case, and spray out battery acid.
•
DO NOT modify the charging system circuitry without written confirmation from Modul-System.
•
If a fuse needs replacing, only use the same rating as removed.
•
Locate the leads so that they will not be stepped on, tripped over, or otherwise subject to damage
or stress. DO NOT lay the leads on the battery. DO NOT operate the system with damaged cables
or plugs
–
have them replaced immediately.
•
This system is designed specifically for charging automotive lead acid batteries. DO NOT use with
dry-cells that are commonly used with home appliances, flashlights, etc. These batteries may
burst and cause injury to persons and damage to property.
•
This system is not intended to supply low-voltage power for applications other than battery
charging.
DANGER: Shock Hazard. Keep away from children!
•
The battery charger’s internal components are
conformal coated to cope with lower
temperatures. It is advisable to avoid moisture.
•
Never expose unit to snow, water etc.
DANGER: Explosion hazard!
• DO NOT use the Modul
-Connect Battery Charger DC-DC 30A in the vicinity of flammable fumes or
gases (such as propane tanks or large engines).
• AVOID covering the ventilation openings. Always operate unit with a minimum of 30mm ‘free air
gap’ around the
unit.
• Prolonged contact to high heat or freezing temperatures will decrease the working life of the unit.
CE EMC INFORMATION
This equipment has been tested and found to comply with the limits for CE EMC standard. These
limits are designed to provide reasonable protection against harmful interference in a residential
installation.
LIMITATIONS ON USE
Do not use in connection with life support systems or other medical equipment or devices.
