MODSTER SPORT CUB S2, User Manual

Page: 19 / 24

F
User Manual MODSTER Super Cub S2
www.modster.at 19
Sport Cub 500 comes with pre-installed
Gyro to help control flying easily.
The switch is with 3 levels to control the
Gyro. To turn on the Gyro, switch to upper
position(towards you). To turn off the Gyro,
switch to lower position(away from you).
CAUTION: It is strongly suggested to turn
on Gyro while flying the Super Cub 500.
Bindungsanleitung
Gyro Switch
Binding is the process of programming the receiver to recognize the
GUID (Globally Unique Identifier) code of a single specific transmitter. When a receiver
is bound to a transmitter, the receiver will only respond to that specific transmitter.
If you need to rebind for any reason, please follow these steps:
1.Keep the transmitter switched OFF, throttle joystick at buttom position.
NOTICE: Keep Gyro switch at Middle or Beginner position.
NOTICE: Keep the plane still in a calm environment for calculating the Gyro.
2.Connect the battery to the plane, then turn on the transmitter within 5 seconds.
3.The receiver LED will flash for 3-8 seconds to bind automatically.
4.After the receiver LED stop flashing, it means the binding process is done.
Follow below steps when you operate a bound plane:
1.Power on transmitter first.
2.Connect the battery to the plane within 3 seconds.
3.The receiver LED in plane will flash and then turn to solid in several seconds.
4.Switch the Gyro control stick to Gyro assist level(MIDD or BEGINNER).
NOTICE: Allow the airplane stay still about 3~5 seconds in a calm environment when
you first time turn on Gyro, in order to calibrate and activate the Gyro. When the Gyro
starts to react, means it is activated.
5.Turn throttle stick up to max and then down to min to arm the motor.
CAUTION: Do NOT operate around people or property, otherwise it may cause serious
damage!
0 - Away From You- Manual / Gyro Off (EXPERT)
1 - At the Middle - Soft Gyro Assit (MIDD)
2 - Towards You - Strong Gyro Assit (BEGINNER)
Throttle Unlock(Arming)
To prevent from damages, the throttle channel is locked each time when powering on
your transmitter. Follow below instruction to unlock the throttle.
CAUTION: Keep the propeller in distance for your safety.
Turn the throttle stick up to max position until you hear a "beep" sound. Then turn the
throttle stick down to min position until you hear a "beep" sound.
Now the throttle is unlocked.
Elevator Trimmer
Elevator
Aileron