Modine Manufacturing Atherion ERM, Installation And Service Manual

Page: 15 / 16

15 ATH15-520.2
Model Identification
The unit is equipped with a serial plate located on the door of the controls cabinet as shown in Figure 15.1. When servicing,
repairing or replacing parts on these units, locate the model Serial Plate of the unit and always give the complete Model Number
and Serial Number of the unit. For a complete description of the model number, see the Model Nomenclature in Table 15.2. Serial
plates shown are examples and may vary slightly from what is on the actual unit(s). Refer to the unit(s) for the actual serial plates.
Figure 15.1 - Serial Plate - Unit
SERIAL PLATE AND MODEL NOMENCLATURE
ERM58CME626A2
11382135113520-1048
THIS ENERGY RECOVERY MODULE IS CONFIGURED TO HAVE ELECTRICAL POWER
SUPPLIED FROM THE MAIN UNIT ONLY. ELECTRICAL LOAD DATA FOR THIS
SECTION IS INCLUDED ON THE MAIN UNIT DATA PLATE. DO NOT POWER THIS
SECTION SEPARATE FROM THE MAIN UNIT.
45
Table 15.2 - Unit Model Nomenclature
Digits Indicates Description Value
1, 2, 3 Unit Type Energy Recovery Module for MPR C-Cabinet Units with Digit 7=B or E ERM
4, 5 Nominal Wheel Diameter
46” (6000 CFM Max) 46
58” (9000 CFM Max) 58
6 Cabinet Size 3000 to 9000 CFM C
7 Energy Recovery Type Enthalpy Wheel, Aluminum with 3 Angstrom Molecular Sieve Desiccant M
8 Economizer Bypass Economizer Bypass E
9 Exhaust Fan Configuration
20” Backward Inclined Airfoil Plenum Fan (ANPA) 3
28” Backward Inclined Airfoil Plenum Fan (ANPA) 6
10
Exhaust Blower
Motor HP
(includes VFD)
1 HP Q
1-1/2 HP R
2 HP S
3 HP T
5 HP U
7-1/2 HP V
10 HP W
11
Exhaust Blower
Motor Type
ODP - NEMA Premium Efficiency - 1800 RPM 1
TE - NEMA Premium Efficiency - 1800 RPM 2
12
Unit Supply Voltage
(must match MPR unit)
208V/3ph 4
230V/3ph 5
460V/3ph 6
575V/3ph 7
13 Sheave Assy Exhaust Fan Sheave Assembly (refer to Order Detail) *
14 Electric Preheat
None 0
20kW Nominal (derated for 208V) 2