13
13
5.
Arm Assembly
Tip!
We recommend using provided glue on inside of
notched attachment point on legs and along back strap
for added strength to these high-stress areas.
A. Place Arm Assembly around chair back. Insert Arms
into corresponding notches on both legs.
(Fig 5A-B)
C. Secure arm assembly to chair back with (8) 1 ¼”
screws. Start with center holes working outward
toward sides.
(Fig 5A-B)
Reminder, do not over-tighten.
D. Re-check that arms are pressed fi rmly down into leg
notches and fasten into place with 2 ½ ” screws at
pre-marked holes on inside of legs.
(Fig 5D)
(5A-B) 1 ¼” SCREWS
(5D) 2 ½” SCREWS
FIGURE 5A-B
FIGURE 5D
B.
Make sure arms are pressed fi rmly down into notches
on legs.
