3
3
Getting Started
1.
• ELECTRIC DRILL/DRIVER RECOMMENDED FOR ASSEMBLY. USE THE DRIVER
BIT PROVIDED.
• USE SAND PAPER TO SMOOTH OUT ANY SCUFFS THAT OCCUR
THROUGHOUT ASSEMBLY.
• DO NOT OVERTIGHTEN SCREWS, OR RISK STRIPPING OUT HOLES.
• WE RECOMMEND USING THE PROVIDED GLUE AT HIGH-STRESS
ATTACHMENT POINTS FOR ADDED STRENGTH PARTICULARLY, STEP 4, ARM
ASSEMBLY.
For easy cleaning and color retention, we recommend fi nishing your
Fernwood Chair with a paint or stain and / or clear coat.
If you plan to fi nish your Fernwood chair, be sure to do so BEFORE
assembly with a water-based stain or paint. Let dry completely before
assembly.
ACRE takes stain and paint well. Paint is easiest to work with on account
of the narrow slats and tight corners.
If you choose to stain, we recommend having a small foam brush and
rag handy when applying your fi nish. When applying stain, begin
with harder to reach areas between seat and back slats, immediately
wiping off excess fi nish from fl at surfaces with your rag. Once you’ve
gotten to all the tighter areas, move on to the fl at, easy to access areas
of each component.
UNPACK ALL THE PARTS FROM SHIPPING BOX.
PAINTING OR STAINING
Notes:
A) (8) 3/4” Screws
B) (8) 1-1/4” Screws
C) (12) 1-1/2“ Screws
D) (14) 2-1/2“ Screws
(1) Chair Back
(1) Chair Arms
(1) Driver Bit
(1) Sand Paper Pad
(1) A-Frame
(1) Glue
(1) Seat Assembly
(1) Left & Right Leg
(1) Seat Support
A
B
C
D
