background image

FR-W1910

Roboto Instructions

32

Congratulations on your new purchase. 

Your new Modern Forms Smart Fan is engineered to make life easier every day. Modern Forms creates future-forward 
fans and luminaires that provide energy savings and outstanding efficiency. Our dedication to doing things the right 
way goes beyond our love for amazing products. Modern Forms Smart Fans™ warrants any of its outdoor rated 
ceiling fan products that they are to be free from defects in material and workmanship for a period of one (1) year 
from the date of purchase; outdoor painted finishes are warranted for two (2) years; LED light modules and electronic 
components are warranted for five (5) years; DC motors and stainless steel finishes are warranted for lifetime under 
normal use to the first non-dealer purchaser.

Although Modern Forms uses the best available materials and does extensive testing for finish endurance, some 
fading or chalking may occur and is considered normal. For coastal locations, some corrosion and/or deterioration is 
considered “normal wear” in this environment. Therefore, any finish claim due to coastal environment conditions is 
not applicable to our warranty. If a product is defective, all efforts will be made to correct the problem in the field. If the 
problem cannot be resolved, an RGA number will be issued. Modern Forms obligation is expressly limited to repair or 
replacement, without charge, at the Modern Forms factory after prior written return authorization has been granted. 
Modern Forms obligation under this warranty shall not extend beyond the distributor’s initial purchase price of the 
product and accordingly any consequential damages or labor costs arising out of a defect are expressly excluded. This 
warranty shall not apply to products that have been altered, improperly installed, mishandled or misused. Notice of 
a defect in writing must be received by Modern Forms within five (5) years from the date of purchase (or according 
period of time as outlined by material). Excluded from warranty are any 3rd party component which carries its own 
manufacturer’s warranty. Note: Modern Forms product warranty applies only to purchases from authorized Modern 
Forms distributors. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF 
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. The Bluetooth ® word 
mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Wangs Alliance 
Corporation is under license. Other trademarks and trade names are those of their respective owners.

Felicidades por tu nueva compra.

Su nuevo ventilador moderno de formas modernas está diseñado para facilitarle la vida cada día. Modern Forms 
crea ventiladores y luminarias para el futuro que proporcionan ahorros de energía y eficiencia excepcional. Nuestra 
dedicación a hacer las cosas de la manera correcta va más allá de nuestro amor por los productos asombrosos. Modern 
Forms garantiza a cualquiera de sus productos para ventiladores de techo con clasificación exterior que estén libres de 
defectos en materiales y mano de obra por un período de un (1) año desde el fecha de compra; Los módulos de luz LED 
están garantizados por cinco (5) años; Los motores de CC y los acabados de acero inoxidable están garantizados de 
por vida bajo el uso normal para el primer comprador no distribuidor.

Aunque Modern Forms utiliza los mejores materiales disponibles y realiza pruebas exhaustivas para la resistencia del 
acabado, puede producirse cierto desvanecimiento o parloteo y se considera normal. Para las ubicaciones costeras, 
cierta corrosión y / o deterioro se considera “desgaste normal” en este entorno. Por lo tanto, cualquier reclamación de 
acabado debido a las condiciones del entorno costero no se aplica a nuestra garantía. Si un producto es defectuoso, 
se harán todos los esfuerzos para corregirlo. El problema en el campo. Si el problema no se puede resolver, se emitirá 
un número RGA. La obligación de Modern Forms se limita expresamente a la reparación o el reemplazo, sin cargo, 
en la fábrica de Modern Forms después de que se haya otorgado una autorización previa por escrito.La obligación 
de Formas modernas bajo esta garantía no se extenderá más allá del precio de compra inicial del producto por 

Certificate of Warranty

Summary of Contents for FR-W1910-62-BA





































Reviews: