Modern Forms FR-W1810-60-AS, Instructions Manual

Page: 20 / 36

FR-W1810 Vortex Instructions 20
6. Attaching the Fan Blades
1. Assemble the three blades together using the blade collector
ring and the screws provided (Figs. 6 & 6A).
7. Installing the Motor Assembly to Fan Blades
1. Attach blade assembly to the motor assembly as shown with
provided blade screws (Fig. 7).
5. Finishing the Installation
1. Secure all wire connections with supplied wire ties to assist in
canopy installation.
2. Tuck connections neatly into ceiling outlet box.
3. Slide the canopy up to hanger bracket and place the key hole on
the canopy over the screw on the hanger bracket. Turn canopy
until it locks in place at the narrow section of the key holes.
4. Align the circular hole on canopy with the remaining hole on the
hanger bracket. Secure by tightening the one screw previously
loosened and the one previously removed. Adjust the canopy
screws as necessary until the canopy and canopy cover are snug.
5. Adjust the canopy screws as necessary until the canopy
and canopy screw ring are snug.
WARNING: Make sure tab at bottom of hanger bracket is
properly seated in groove of hanger ball before attaching canopy to
bracket. Failure to properly seat tab in groove could cause damage to
electrical wiring.