manualshive.com logo in svg

Modern Forms AXIS, Installation Instructions Manual

Share
Download
Modern Forms AXIS Installation Instructions Manual Download Page 16

16

FR-W1803

10. ATTACHING THE FAN BLADES

11. INSTALLING THE ADAPTER PLATE

Screws with

rubber washers

Blade

Slot

Mounting ring

Screw

Adapter 

plate

FIGURE 17

FIGURE 18

 

1.  Remove one of the three mounting plate screws from the  

mounting ring and loosen the other two screws. (Do not remove.)

2.  Place the key holes in the mounting plate over the two screws 

previously loosened from the mounting ring. Turn the mounting 
plate until the adapter plate locks in place at the narrow section of 
the key holes. (Fig. 18)

3.  Tighten the two mounting ring screws previously  

loosened and the one previously removed to secure adapter plate.

1.  Attach the blade to the blade arm using the screws with rubber 

washers as shown in Figure 17. Start screw into blade arm. Re-
peat for the two remaining screws.

2.  Tighten each screw. Make sure the blade is straight.
3.  Fasten blade assembly to motor using the screws supplied.  

(Fig. 17)

Summary of Contents for AXIS





























Reviews:

No comments

Brands by name

Popular brands

Load more brands