manualshive.com logo in svg

Modern Forms AXIS, Installation Instructions Manual

Share
Download
Modern Forms AXIS Installation Instructions Manual Download Page 15

15

FR-W1803

FIGURE 16

Outlet Box

Hanger Bracket

Canopy

Canopy Screw Cover

9. FINISHING THE INSTALLATION

1.  Secure all wire connections with supplied wire ties to assist in 

canopy installation.

2.  Tuck connections neatly into ceiling outlet box.
3.  Slide the canopy up to hanger bracket and place the key hole on 

the canopy over the screw on the hanger bracket. Turn canopy 
until it locks in place at the narrow section of the key holes.  
(Fig. 16) 

4.  Align the circular hole on canopy with the remaining hole on the 

hanger bracket. Secure by tightening the one screw previously 
loosened and the one previously removed.

5.  Adjust the canopy screws as necessary until the canopy and  

canopy cover are snug.

WARNING: Make sure tab at bottom of hanger bracket is properly 

seated in groove of hanger ball before attaching canopy to bracket. 

Failure to properly seat tab in groove could cause damage to electrical 

wiring.

Summary of Contents for AXIS





























Reviews:

No comments

Brands by name

Popular brands

Load more brands