English
28
-
Start the washing program
For choosing the program please follow below steps:
1. Connect the cable to power supply.
2. Choose the program by rotating program knob..
3. Adjust the spin speed and another additional program if it is wanted.
4. Push START/PAUSE button to start program.
5. The symbol related to program (start sysmbol, door loock, etc) will be showed in display.
Program progress
The progress and the temperature are showed on lighting indicator. Display shows the estimated
washing time.
Change the washing program
In order to change the current washing program to new washing program, you can follow below steps:
1. Push and hold
“START/PAUSE” button for 3 seconds to stop and cancel the previous
program (ex:
“Cotton”)
2. Rotate the program knob to the new program (ex:
“Wool ”)
3. Then push
“START/PAUSE” button to start the program.
-
Adding or taking the laundry out.
Push
Start/Pause
button
to change the status to Pause. The indicator lamp related to the
program is dipping. Wait until the door can be opened. Open the door and add or take the laundry
out. Close the door again. Reset again the additional program, temperature, and speed if needed.
Push Start/Pause button to start the washing process again.
Attention:
Door can’t be opened if the temperature or water level is too high.
-
Ending Program
When the washing process is end then the chosen program symbol will be on and the display will
show “00”, which indicate that the process has been end.
