English
17
During using:
Whether there is strange smell, odour or vibration noise?
Whether the temperature is out of control or there is electric leakage?
Whether the power is normal?
1.
Disconnect the power supply before cleaning the appliance in case of any electric shock
accidents.
2.
When finish working every day, pull out the food receiving tray to clean and scrub the furnace
surface and power line with soft cloth containing non-corrosive detergent. Do not spray the
appliance directly with water jet. Water infiltration may damage electric property and cause
electricity safety accident.
3.
If not going to use the appliance, please turn the thermostat and power switch off.
4.
If not going to use the appliance for a long time, please clean it completely and store it in a well-
ventilated warehouse with no corrosive gas.
When conducting out the failure check & trouble shooting, make sure the device is cut off from the
power supply connection.
Stop using immediately when you find out the heating elements are damaged.
Symptoms
Causes
Solutions
The
power
supply
is
connected and the heating
indicator is on, but it does
not heat up.
3. The thermostat is damaged.
4. At least one of the heating
wires burns out.
3. Replace the thermostat.
4. Replace the burnt-out
heating wire.
Connect the power supply
and rotate the thermostat,
the heating indicator is on,
but the temperature keeps
rising and out of control.
2. The thermostat does not work. 2. Replace the thermostat.
The
power
supply
is
connected and heating is
normal, but the indicator is
off.
2. The indicator is damaged.
2. Replace the indicator.
It does not heat up and the
indicator is off.
3. The power supply is abnormal
and disconnected.
4. The fuse is fused.
3. Check the power supply
and connection to make
it supply normally.
4. Replace the fuse.
Aforementioned troubles are just for reference. If any failure occurs, please stop using, and
contact MODENA customer care to check and repair.
Part 6: Failure Analysis &Trouble Shooting
Part 5: Cleaning & Maintenance
