13
supporter (12); Then Install the door supporter to right side. Refer to Fig.D
8. Take the lower left door hinge (17) from the accessory bag and then install it to left side; Then
install the plinth back; Refer to Fig E
9. Rotate the door by 180 degree and insert the door axis pin into the lower left door hinge hole;
Close the door and carefully install the upper left door hinge (18); Screw the decoration nail and
decoration cover until secured. Fig. F.
Special for Model WC 1022 S & WC 1022 L
This appliance has a door which position can be exchanged to open the appliance.
1. Tilt the appliance upward to 45 degrees, remove the hinge screws on the bottom right with a
screwdriver (Figure 1).
2. Level the wine cooler, hold the door and remove upper right hinge's screws with screwdriver, then
take out the door, put the door safety, unscrew 2 screws at the bottom and remove the reed switch,
then install at top of frame, and take out the location-plate's screws and fix the location-plate on the
other side, and rotate the door 180 degree (Fig.2 & Fig.3 & Fig.4).
Summary of Contents for Scuderia Series
Page 23: ...11 20 ...