Modena MV 3002, Manual

Page: 17 / 28

English
15
1. Make sure all the packing materials are removed from the inside of the door.
2. Inspect the oven after unpacking for any visual damage such as :
-
Misaligned Door
-
Damaged Door
-
Dents of Holes in Door Window and Screen
-
Dents in Cavity
If any of the above is visible, DO NOT uses the oven.
3. This microwave oven must be placed on a horizontal surface strong enough to support this weight.
4. The oven must be placed away from high temperature and steam.
5. DO NOT place anything on top of the oven.
6. Keep the oven at least 8 cm away from both sidewalls and 10 cm away from rear wall to ensure the
correct ventilation.
7. DO NOT remove the turn-table drive shaft.
8. As with any appliance, close supervision is necessary when used by children.
WARNING:
1. The plug socket should be within easy reach of the power cord.
2. This oven requires 1.5 KVA, 250V, 10A Fuse for its input. Consultation with service engineer is
suggested when installing the oven.
Part 1 :
Installation
NOTE:
The wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow : Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains leads of the appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
~The wire which is coloured green-and-yellow must be connected to the terminal in the plug
which is marked with the letter E or by the earth symbol coloured green of green-
and yellow.
~The wire which is coloured blue must be connected to the terminal which is marked with the
letter N or coloured black.
~The wire which is coloured brown must be connected to the terminal which is marked with
the letter L or coloured red.