Modena Igienico Series, Manual

Page: 24 / 28

24
Cleaning & Maintenance
1. Ensure the power cord is unplugged before performing cleaning and
maintenance activity
2. Dispense the water from the unit until it’s empty
3. Place a big bucket under the water drain hole on the back of the unit,
unplug the drain cover and empty the remaining water from the tank
4. After it is completely dry, close the drain water cover.
Before contacting service center, check the following table:
Problem Possible Cause Recommended Action
Appliance is not working Power plug is plugged
incorrectly
Switch is in OFF condition
Ensure the appliance is
properly plugged into the
power socket and the
switch is turned ON.
The water is not hot or
cold • Hot or cold water is
dispensed
exccessively in a
short time
• The unit is not
plugged
• Wait for a few
minutes until the
water is hot or cold
•
Plug the power cord
into the power
socket and turn on
the heating/cooling
switch
Water is not being
dispensed from water tap
• Water bottle is empty
• The pipe is clogged
• Replace the water
bottle with a new one
•
Turn of the switch for
4 hours and then turn
the switch back ON
PART 4: MAINTENANCE
PART 5: TROUBLESHOOTING