English 5
Installation Instruction
•
This water heater should be installed on a solid wall. If the strength of the
wall cannot bear the load equal to twice bigger of the total weight of the
water heater filled fully with water, it is then necessary to install a special
support. In case of the hollow bricks wall, ensure to fill the wall with
concrete cement completely, and use anchor fastener bolt (expansion bolt)
in case of the hebel wall.
•
After selecting a proper location, determine the position of two holes that
are used for the installation of the expansion bolts with hook. Make two
holes on the wall by using a chopping bit with the depth matching to the size
ES 10IS
ES 15IS
A
324 mm
368 mm
B
324 mm
368 mm
C
315 mm
340 mm
D
66 mm
66 mm
PART 2: PRODUCT INTRODUCTION
PART 3: INSTALLATION