English 17
-
Install the main chimney and the upper chimney on brackets I
and II with the available screw.
WORK METHOD
Tudung hisap MODENA mempunyai 2 (dua) versi cara kerja yaitu:
DUCTING SYSTEM:
In this mode, the hood operat es by sucking the smoke / cooking odor
and then discharging it out of the vent through the exhaust system.
To connect the hood with the discharge duct, use "spigot/flange" is
designed wit h a diameter of 150 mm.
Several things which require attention in installing the ducting system vent hood:
1. Carbon filter must be removed. Only use the aluminum filter.
2. If the hood is to be installed in a multi-storied building or an apartment, consult with the person in
charge of the building / apartment prior to installing the exhaust system.
3. Hood with ducting system should be used in an open-air room with good air circulation.
RECIRCULATI NG system:
In this version, the vent hood sucks the smoke / cooking odor and filters it through an aluminum filter and
carbon filter. The filtered smok e is then recirc ulated into the room. This s ystem is used if t he premise
renders it impossible to install a ducting system.
Several things which must be ensured when installing a vent hood with recirculating system:
1. Both carbon filter and aluminum filter must be used.
2. The position of both filters must be correct.
3. Holes where air duct is discharged found in the front cabinet of the vent hood cannot be closed.
Connect the power cord with an electrical outlet.
Slide or press the motor speed button to turn hood on or off as shown in the following picture.
Note s:
Adjust the motor speed of the vent hood according to the thickness of smoke / steam generated by the
cooking process.
Part 3:
How to Use
