6
1. Place the dispenser on an even surface. Avoid placing it in a humid place.
Provide a minimum of 20 cm distance from the wall and do not store
flammable substances near the dispenser
.
2. To avoid damaging the machine, do not connect the electrical cord or
pressing hot water switch (red) until the water can flow out from the hot
water tap without obstruction.
3.
If the dispenser won’t be used for a long period, turn off the heater and
cooler switches and disconnect the cord from the electrical socket and
drain the water through the drainage.
4. Do not use chemical substances or spray the water directly to clean the
dispenser. Use soft cloth instead.
5. Do not pull the cord to disconnect the plug from the socket. Pull the plug
with dry hand.
6. Do not put the dispenser horizontally. The slope should not exceed 45° to
avoid damage to the compressor.
7. The thermostat on the dispenser has been adjusted by the manufacturer.
Do not attempt to modify the thermostat to avoid unwanted effect.
Part 5:
Precaution Action