7
IMPORTANT: This stage of the installation process must be completed by
two people. The 16 pieces of M5 screws must be securely tightened
7. If you are going to be using the hood in extraction mode, you should fix
the ducting hose to the ceiling. Remove the hanging hook and then slide
the lower chimney section downwards, until it rests against the main body
of the cooker hood
•
The electrical connection must correspond to the electrical
requirement noted on the rating plate, which is placed inside the
cooker hood. The appliance should now be connected to the
electrical supply.
•
Check that the appliance is operating correctly by selecting each
speed and switching the light bulbs on and off.
•
Use a stainless steel cleaner and polish on the stainless steel
sections of the appliance.
•
If you are using the appliance in recirculation mode, then you
should now fit the carbon filter
Installation (Re-circulating System):
•
If you do not have an outlet to the outside, exhaust pipe is not required and the installation is similar to the one show
in section “Installation (DUCTING / EXHAUST System)”.
•
Activated carbon filter can be used to trap odors. In order to install the activated carbon filter, the grease filter should
be detached first by press the lock and pull it downward.
•
Plug the activated carbon filter into the unit and turn it in clockwise direction. Repeat the same on the other side.
Summary of Contents for Cesena Isola Series
Page 12: ...12 20 ...
