46
Replacing the Oven Lamp
Remove the glass protector by rotating it. Using plastic gloves may help you if you
have difficulty in rotating it.
Then, remove the lamp by rotating it, and install the new lamp with the same
specifications. Replace the glass protector, plug the appliance and complete the
replacement procedure. You may now use your oven.
Cleaning and Assembly of the Oven Door
•
Open the door completely by pulling the oven door towards you. The, as
shown in picture 7.1, pull the hinge lock up with a screwdriver and perform
the unlocking operation.
•
As shown in Picture 7.2, bring the hinge lock to the maximum angle. Bring
both hinges that connect the oven door to the oven to the same position.
•
Then, close the oven door you have opened to that it shall lean against the
hinge lock as shown in figure 8.1.
•
To remove the oven door, hold the door with both hands when it is at a close
level to the closed position, and pull it up as shown in Picture 8.2
Summary of Contents for BO 7838
Page 1: ...User Manual Book Oven Bravo Series BO 7838 ...
Page 56: ...11 20 ...
