29
Problem
Possible Cause
Recommended Action
Spillovers on the
touch controls
•
Switch off the power
supply.
•
Soak up the spill
•
Wipe the touch control area
with a clean damp sponge
or cloth.
•
Wipe the area completely
dry with a paper towel.
•
Switch on the power supply
to the hob.
•
The hob may beep and turn It
self off, and the touch
controls may not function
while there is liquid on them.
Make sure you wipe the
touch control area dry before
turning the hob back on.
If you find something goes wrong for your hob, before contact the
service or where you purchased it, please check whether below:
1. There is no power to the appliance:
- Check whether there is a power cut of your department.
- Check whether the appliance be connected to electricity
properly.
- Has the timer setting elapsed.
- Whether it reaches the longest cooking time setting and auto shut
off.
- Whether there is liquid boiling over touch control panel and
overflow protection devices auto shut off.
2. The touch control panel buttons can’t be active:
-
Whether it’s under “Child Lock”, which there is “Lo” shows in timer
displayer.
- Whether liquid/wet cloth over touch control panel active overflow
protection.
3. After cooking there is “H” shows on display:
- This is normal. The hob is with Residual Heat Warning safety
features. It will remain on until the surface is cool enough for
touch.
4. After turn off, the fan of induction hob remains working for a while:
Summary of Contents for BC 1321 L
Page 1: ...User Manual Book Built In Electric Hob BC 1321 L ...
Page 32: ...02 21 ...
