Modena BC 0321 L, User Manual Book, Page: 8 / 20

8
Note: The safety distance between the hotplate and the cupboard above the hotplate should be at least 760 mm
A (mm) B (mm) C (mm) D E
760 mm 50 mm minimal 20 mm minimal Air Intake Air exit 5 mm
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force on to the controls
protruding from the hob.
Easy Fit kits
There is one easy fit kits package for each hob, include fixing clips and screws (for ceramic hob there
are total 2 pcs clip and 2 pcs screw, for induction hob there are total 4pcs clip and 4pcs screw). Find the
easy fit kit package first
Fix hob to cabinet: Insert the hob into the cabinet/work surface as below diagrams, the mounted clips on the sides
can secure your hob sturdily.
Connecting the hob to the main power supply
The power supply should be connected incompliance with the relevant standard,or a single-pole circuit breaker.
The appliance has a large power rating and must be connected to electricity by MODENA Technician
Notes:
1. If the cable is damaged or needs replacing, this should be done by MODENA technician using the proper tools,
so as to avoid any accidents.
2. If the appliance is being connected directly to the main supply, an omnipolar circuit breaker must be installed
with a minimum gap of 3mm between the contacts.
3. The installer must ensure that the correct electrical connection has been made and that it complies with safety
regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by MODENA technician.