Modena BC 0321 L User Manual Book Download Page 11

 

11 

 

2.  When the hob in Standby mode, if there is no practice within 1 minute, the electric hob will auto turn off, with 

buzzer beeps once.

 

3.  You can modify the heat setting at any time during cooking. The heating element will turn off under power level 0, 

with indicator shows “-”

 

4.  The heat setting indicator of the selected zone will flash when adjusting. After adjusting, the number in indicator 

will flash for 5 seconds and then stop flash, then the setting has been confirmed. 

 

 

To turn off the hob 

1.  Adjust heat setting to 0 level, which indicator show 

“-“ 

 

2.  You  can  also  turn  the  whole  hob  off  by  touching  the  ON/OFF  

control button

 

 

Notes:

 

1.  If there is power cut off during cooking, all programmers setting will be cancelled, you need to reset the 

programmer again.

 

2.  The cooling fan of induction hob will remain on for about 1 minute after the hob is turned off.

 

 

Beware of hot surfaces

 

After turn off, the  

 will show in the power setting indicator if cooking zone is hot to touch. It will disappear when 

the surface has cooled down to a safe temperature.

 

When in  Standby mode,  if  the surface of cooking zone is hot to touch, the letter “H” and “-” will show  in its heat 
setting indicator alternately

 

Using Large Heating Area-Ceramic Hob 

For 

BC 1321 L, BC 1721 L

, have one or several extended cooking zones (Dual/Triple zone), these extended zones 

can provide larger cooking

 read and additional heat. 

 

To active extended zone 

when hob is working

, please follows below: 

 

1.

 

Select and active cooking zone you would like to use extended 
zones. 

 

For model BC 1721 L

 

 

Touch the       or          button of corresponding heating zone to 
active it for adjustment. 

 

For model BC 1321 L:

 

 

Touch  the  corresponding  cooking  zone  select  button  to  active 
for adjustment.

 

2. 

The  central  zone  will  be  switched  on,  when  first  adjust  of  heat 
level for extended

 

cooking zone.

 

 

 

3. 

When  the  heating  zone  be  selected  and  active  (power  level 
indicator flashing),

 

touch extended zone control button          to 

active extended heating element to get a large heating area.

 

 

Notes:

 

1.  By continuous touch the control button, the extended zone works at below consequence:

 

-

Dual zone: “Central-Dual-Central-Dual-Central zone…”

 

2.  When the Dual Zone of extended cooking zone active, the LED indicator of it will show heat setting and

 

“  “alternately 

 

Child Lock Safety Control 

 

You  can  lock  the  controls  to  prevent  unintended  use  (for  example  children  accidentally  turning  the  cooking 
zones on) by active Child Lock function. 

Summary of Contents for BC 0321 L





















Reviews: