Modena Adattare Series, User Manual

Page: 31 / 34

31
Problem Possible Causes Solution
Not enough
detergent was
dispensed Use more detergent, or change your
detergent.
Items are blocking
the movement of the
spray arms Rearrange the items so that the spray
can rotate freely.
The filter
combination is not
clean or is not
correctly fitted in the
base of wash
cabinet. This may
cause the spray arm
jets to get blocked. Clean and/or fit the filter correctly.
Clean the spray arm jets.
Glassware look
muddy Combination of soft
water and too much
detergent Use less detergent if you have soft
water and select a shorter cycle to
wash the glassware to get them clean.
White spots
appear on dishes
and glasses. Hard water can
cause white spots Add more detergent.
Black or gray
marks on dishes Aluminum cutlery
rubbed against
dishes Use a mild abrasive cleaner to
eliminate those marks.
The dishes are
not dry
Improper loading Load the dishwasher as suggested in
the directions.
Dishes are removed
too soon Do not empty your dishwasher
immediately after washing. Open the
door slightly so that the steam can
come out. Take out the dishes until the
inside’s temperature is safe to touch.
Unload the lower basket first to prevent
the dropping water from the upper
basket.