11
6. Click on the
Save/Reboot
button to save your configurations.
b. PPP over ATM (PPPoA)
1. Select
PPP over ATM (PPPoA)
as connection type, and select
VC/MUX
as
encapsulation mode.
2. Input
PPP Username
&
PPP Password
and then click
Next
. The user interface
allows a maximum of 256 characters in the user name and a maximum of 32 characters
in the password. Just remember to enable
NAT
and
Firewall
as below.
PPPoA service name
can be blank unless your Internet Service Provider gives you a value
to enter.
The
Authentication method
is default to the
Automatic
setting. It is recommended that you
leave the
Authentication method
in
Automatic
, however, you may select
PAP
or
CHAP
if
necessary. The default value for MTU (Maximum Transmission Unit) is
1500
for PPPoA and
1492
for PPPoE. Do not change these values unless your ISP requests you to.
