background image

Page 

If you liked the Model Tech Apex 3D EP ARF, here's a few of the many

other Model Tech ARF airplanes that are currently available:

Mini Magic Extra ARF

(P/N 123661) (MT3192D-5)

Inspired  by  it's  larger  brother,  the  Magic  Extra,  this  smaller  version  has  the 

construction you expect: Laser cut parts, Quality Contruction, Iron-On covering, 

Fiberglass Cowl and all the design features that make the Magic Extra so great: 

Thick Airfoil, Light Wing Loading, Generous Wing Area and  Large Control Surfaces. 

Model Tech has combined it all to make this a fun and great performing airplane. 

Model Tech recognizes that modelers around the world want selection. So, this 

Mini has the ability to take glow or electric power.  Install a .15 two-stroke or a 

30 four-stroke engine, or for you electric enthusiasts, drop in a Multiplex 480 BL 4T 

Geared motor and watch it dance!  Hardware for both are already included and an 

easy access panel is standard for the fuel tank area, which is also where your 

flight battery is installed if you are flying electric.

Sukhoi SU-31 3D Profile ARF

(P/N 123741) (MT3192K)

The Model Tech Profile Sukhoi ARF (almost ready to fly) is a 

high performance pilots dream, whether you are an expert or 

working  your  skills  to  achieve  such  skill.  Built  with  the  finest 

wood materials, the Sukhoi is a plane that will advance your 

flying prowess beyond mere loops and rolls. The Profile Sukhoi 

will hover, knife edge, perform blenders, and all the advanced 

3D  aerobatics.  The  ModelTech  engineers  have  designed  the 

Sukhoi  31  to  handle  superbly  due  to  its  lightweight  wing 

loading,  tapered  wings,  and  HUGE  control  surfaces.  Factory 

built and covered with Monokote.

Fledgling EP ARF

(P/N 123505) (MT3209E)

The Fledgling is the perfect electric trainer. With its large size and 

affordable electronics you will not have any of the high start-up costs 

associated with smaller electric models. The simple layout and trouble 

free installation make assembly a pleasure. A light wing loading and 

ample  power  together  with  rock  steady  flight  characteristics  make 

learning easy. This, combined with a model that has full four channel 

functions will help you to grow your piloting skills as you progress to 

more advance aerobatics.

Mach Racer Delta ARF

(P/N 123780) (MT3211B)

Fast and Agile... Ready for an adrenaline high? Well, hold on tight when you 

fly the Mach Racer from Model Tech. This is one fast delta. At 3.5 lbs flying 

weight, power-to-weight is certainly no issue when you install your favorite 

46 two-stroke engine. The simple and clean airframe makes this delta fast 

and fun to fly. Because it's a delta, you do not have to worry about 

slow-speed handling! It is amazingly gentle at slow speeds for such a fast 

plane. The Mach Racer is easy to take off and land, and taxi's nicely if you 

use the included landing gear. Go on, grin ear-to-ear, it's ok. Speed is fun and 

the Mach Racer delivers.

Summary of Contents for Apex 3D EP ARF

























Reviews: