14
Rotation adjustment «D2»
Unless stated otherwise on the torque
reaction system, the maximum torque allowed is
1000 Nm.
The chain must remain in the plane of the
arm and must not work at an angle greater
than ±30° to the perpendicular of the arm.
If you use the BR001, attach the strap to a strong fixed point, making sure that the strap makes an angle of
between 75° and 105° with the BR001, and that it remains in the plane of the BR001 (it should not go
down or up).
5.
Attach the torque management system
to the front of the portable valve
actuator using the two spring loaded
pullers.
Note: The BA012 torque management system
is only valid up to a maximum torque of 350
N.m. It varies according to the nature of the
soil (loose earth or bitumen) and the weight
of the operator. Always ensure that the
maximum torque set on the actuator is 350
N.m or less. If the required torque exceeds
350 N.m, or if it turns out that the BA012 is
not enough, use the BR001 which can go up
to 1000 Nm.
6.
Tilt the actuator onto the head of the
telescopic spanner.
7.
Adjust the length of the foot
articulated reaction armBA012 so that
the operator is stable and comfortable
when standing on the horizontal bar on
the floor. The wheels must be up.
Rotation adjustment «D1»
2
1
Summary of Contents for MC89 Series
Page 1: ...INSTRUCTION MANUAL WATER KIT ENGLISH...
Page 7: ...7 Certification CE...
