modec MC89 Series, Instruction Manual

Page: 13 / 24

13
Setting up and use the water kit
General info
The actuator must be kept stable while turning the valve or handwheel. modec Portable Valve
Actuators can be used in any position. However, to ensure the operator is working safely and
in the best conditions, it is imperative that the actuator is used in the axis of the handwheel
being activated.
Setting up and use the water kit
1. Select the interface corresponding to
the shape of the drive shaft, and
connect it to the telescopic fountain
key.
Make sure that the ball on the square
at the end of the key is properly
engaged in the socket.
2. Adjust the length of the telescopic key
and secure the pin.
3. Add the 0.5m fixed extension if required.

See page 14 for installation
4. Lower the telescopic key into the water
box until it is connected to the valve
drive shaft. Check that the connection
is solid.