manualshive.com logo in svg

MODE Terraonion, Setup & Instruction Manual

Share
Download
MODE Terraonion Setup & Instruction Manual Download Page 4

Key Features

• Supports both 20 and 21 pin Sega Saturn models
• Supports VA0 and VA1 Dreamcast models (VA2 not supported)
• Auto region patching (loads games from different regions without patching games)

• Auto detects the console that it’s plugged into. No jumpers to configure

• SATA port for 2.5 inch laptop style Hard Drive or SSD
• USB port for thumb drives
• MicroSD card slot
• Supports both exFAT and FAT32 formats of greater than 2TB
• Compatible with Redump and Tosec images (for both Dreamcast/Saturn)
• Compatible with CDI, GDI, CCD, MDF, BIN/ISO/WAV +CUE images

• Plug and play with no soldering required

• 2 User interfaces: Simple list view and Advanced Cover Art
• Supports multiple disc games
• Zero seek times providing faster load times
• Supports MPEG card, ActionReplay/PseudoSaturnKai and Saturn RAM cart 
• DC Digital, DreamPSU and PicoPSU compatible

SEGA Saturn & Dreamcast compatible

HDD/SSD, MicroSD & USB Drive storage

Summary of Contents for Terraonion


































Reviews:

No comments

Brands by name

Popular brands

Load more brands