3
Operation Direction:
1. When in AC air compressor working situation, please put AC
transformer plug into compressor power jack, and connect with
AC power at the same time.
2. Press the white power on/off switch, the compressor start working.
Then press the same button for a short second continuously, it will
cause the working pressure change, with the green working light
changes, the so called working pressure adjustable. And please
turn off the compressor when stop use (By pressing the white
switch for three second).
3. There is an electric shock hazard if connect the power plug in a
wrong way.
4. The compressor has internal hot protection device, the compressor
will auto cut off the power when over heat, and reset after the
motor cool down.
5. Put the airbrush back to the airbrush holder, to prevent the airbrush
drop or the ink dump out.
6. PLS use the airbrush compressor in a right way, don’t touch the
machine by wet hands.
7. After using, PLS clean the airbrush.and pull up the AC adapter
immediately, put it in a dry place.
8. Automatics unable to keep pressure for long time, in order to
extend the servicelife , PLS turn off the compressor when stop
working
Summary of Contents for HS08-6 Series
Page 5: ...5 Description...
Page 6: ...6 Spare Part List...
