MAP-01 USER MANUAL
ARPEGGIO SIDE/ SPLIT POINT
8. ARPEGGIO SIDE
- selects the side of the keyboard which is occupied with the arpeggio. This setting refers to the
selected split point.
8.1 ARPEGGIO SIDE (BOTH)
- there is no seperation and all notes are used for thr arpeggio
8.2 ARPEGGIO SIDE (LOWER)
- the notes of the lefthand side of the keyboard are used for the arpeggio. The notes on the
righthand side stay ignored.
8.3 ARPEGGIO SIDE (RIGHT)
- the notes on the righthand side of the keyboard are used for the arpeggio. The notes on thr
lefthand side stay ignored.
9. SPLIT POINT
9.1 SPLIT POINT (NONE - e.g. C4)
Selection of the split point for the arpeggio. The value can be selected through the encoder or
directly via MIDI. You can move the pitch wheel to each direction and then play a note on the
keyboard to set the note value to NONE.
RUN NOTE/ STOP NOTE/ VELOCITY
10. RUN NOTE
10.1 RUN NOTE (NONE -e.g. C4)
- selection of the run note of the arpeggio. Same as switching on the RUN MODE. The value can
be set via the encoder or directly via MIDI. By moving the pitchwheel and pressing a note on
the keyboard the note value is set to NONE.
