Caution and Room Preparation before Operating Your i3 Robot.
03
.
a.When
your i3 robotic cleaner
is in charging, the “ ” indicator light will flash blue color slowly
b.When the charging is completed, the “ ” indicator light will keep in blue color.
c.When the power is not enough in standby mode,
your i3 robotic cleaning
will send out a voice
message ”please charge” and “ ” indicator light will become red color.
d.When the power is not enough in the working model,
your i3 robotic cleaning
will stop cleaning
and look for charging dock automatically and “ ” indicator light flash red color.
Methods for extending the lifetime of the battery:
a.Please charge
your i3 robotic cleaner
for 12 hours for the first use.
b.When the power is not enough, please charge it immediately.
c.When the cleaning is finished or the power is too low,
your i3 robotic cleaner
will start to return
the charging dock automatically.
d.If
your i3 robotic cleaner
will not be used for a long time, please charge it fully, take the battery
out and keep it in the dry and ventilated place.
e.If
your i3 robotic cleaner
is not used for 3 months, please charge it for 12 hours at one time.
11
12
Put the charging dock on the ground against the wall and remove all the obstacles 2-3 meters
in front of the dock as shown in the figure below.
If your i3 robot is in the power-off state,please switch it on.
You can charge your i3 robotic cleaner by the following two ways.
a. Plug the power adapter directly on your i3 robotic cleaner with the other end connected with
power as shown in the pic.a.
b.Please press “ ”remote control to make your i3 robotic cleaner back to charging dock by itself
as shown in the pic.b.
