PRODUCT PARAMETER
Parameter
350 mm
97 mm
4.5 kg
14.4 V
Ni-MH 2000 mAh
0.35 L
Items
Diameter
Height
Net weight
Voltage
Battery
Dust bin
Manual / Auto
4-6 hours
70 minutes
Touch button
Auto, Edge,Spot,Zigzag
Parameter
Item
Charging type
Cleaning mode
Charging time
Cleaning time
Button type
TROUBLES SHOOTING
Voice Notice/Problems
Possible reasons
Solution
Please turn on the power switch
Please put the machine in a safe place
Wheel overload
Please install dustbin
Side brush fault
Signal-short
Front bumper fault
Please Charge
Power switch is not power on when
charging
Machine is not on floor,or its wheel
falls down. Sensors covered by dusts
Left and right wheel jammed by
cables or ropes
Machine trapped by obstacles
No dustbin in machine,
Dustbin is incorrect installed
Left side brush or right side brush
ammed by dusts, or obstacles
Hair or other debris jammed the
roller and cause Overload on roll
Front bumper does not reset to
position.
Front bumper jammed by obstacles
Battery in unit machine is in low level
power
Switch on the power button
Put the machine in a safe floor
Check the sensors hole,
and remove all the dusts.
Remove the obstacles winded on
wheels
Take out the machine from obstacles
Check and fit the dustbin into
machine.
Take out and reinstall the dustbin into
machine
Remove the dusts or obstacles
jammed on brush
Remove the hairs or other debris on
roller brush
Check out the bumper
function if it can trigger back, and
reset to position
Machine trapped in obstacles, take it
out of obstacles.
Press the charging to charge the
machine.Machine will get back to
station for charging automatically
WARNINGS ABOUT BATTERY INSIDE UNIT BODY
REMOVAL OF BATTERY INSIDE UNIT BOY
You must not remove (or attempt to remove) the battery incorporated in this product on your own.
To replace the battery, you must contact your service provider or an independent qualified
professional. These instructions have been prepared for the exclusive use of your service
provider or independent qualified professional.
FOR YOUR OWN SAFETY, DO NOT ATTEMPT TO REMOVE THE BATTERY ON YOUR OWN OR DISPOSE
OF IT IN FIRE. DO NOT DISASSEMBLE, CRUSH OR PUNCTURE THE BATTERY.
1.Remove the screws on battery cover with a screw driver.
2.Remove the battery cover.
3.Grasp the insulating tape at two sides of the battery and lift the battery.
4.Unplug the wire connector that links the battery and robot.
Correct disposal of batteries in this product
(Applicable in countries with separate battery return systems.)
The marking on the battery, manual or packaging indicates that the battery in this product
should not be disposed of with other household waste. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury,
cadmium or lead above the reference levels in EC Directive 2006/66.
The battery incorporated in this product is not user replaceable. For information on its
replacement, please contact your service provider. Do not attempt to remove the battery or
dispose it in a fire. Do not disassemble, crush, or puncture the battery. If you intend to
discard the product, the waste collection site will take the appropriate measures for the
recycling and treatment of the product, including the battery
19
20
Zone
