Assembly & Installation
WALL MOUNTED FIREPLACE ASSEMBLY:
For safety purposes, we recommend a professional contractor to mount all wall-mounted fireplaces.
Two or more people are recommended to install a wall-mounted fireplace. Wall mounted fireplaces are to be mounted
only on a solid wall that can sustain the weight of the fireplace. The mounting wall is to be constructed from
non-flammable materials.
Wall Mounted Fireplace Assembly Step:
1. Remove all parts from shipping carton (do not discard shipping material until the item is fully assembled).
2. Locate the mounting bracket(s).
3. - Use a stud finder to locate the studs in your wall. Place the top bracket to make your marks after the mount is
leveled and secure the mounting bracket to the studs.
- If studs could not be located and you have a hollow wall, we always recommend using butterfly anchors
(maybe purchased from any hardware store).
- If your wall is not hollow, use the drywall anchors to mount the brackets.
4. Measure the distance between the top holes and the bottom holes in back of the fireplace.
5. Mount the bottom brackets based on the distance between the top and bottom holes in the back of the
fireplace.
6. Drill a hole into the wall for the bottom bracket then put the drywall anchor into the hole.
7. Place bottom bracket over the anchor in the wall and screw through the bracket into the anchors.
8. Have 1 person hold the fireplace over the mounted brackets while the 2nd person inserts the screws and
washers through the holes into the brackets.
9. Make sure the wall fireplace is mounted with the topside up.
10. Make sure the fireplace is securely mounted to the wall before adding fuel.
Starting Up:
-
Fill the reservoir containers (ethanol burner) with
Moda Flame ethanol fireplace fuel only
, up to the maximum
marking (2/3
rd
) of each burner. Then light with an extended candle lighter (not included with fireplaces or fuel).
-
The flame will light slowly at first, please a allow 15 minutes to reach the optimum temperature and flame height.
-
Spilled ethanol fireplace fuel must be wiped with an absorbent tissue prior to lighting
CAUTION:
Spilled fuel may lead to matt stains on parquet flooring.
ATTENTION:
Moda Flame ethanol fireplace fuel should be stored at room temperature to facilitate its ignition.
CAUTION:
-
Fuel must be kept in safe distance (min. 40 inch) of the fireplace.
-
Do not place fuel in front or around the fireplace at any point.
-
Always keep unused fuel sealed.
-
In case the flame does not ignite, please repeat the ignition process until the flame burns steadily.
-
Never light the fireplace with a standard lighter or match.
-
Keep face and other body parts away from burner at all times especially during ignition and operation.
-
Keep out of reach of children and pets.
Refill:
Summary of Contents for Naples GF301525BK
Page 5: ...Assembly Diagram ...
