Kit Contents:
2 2N3906 PNP TO-92 Transistors
2 1N414A Diodes
1 1K Linear Pot
1 10K Linear Pot
1 9V Battery Clip
1 DPDT Footswitch
1 ¼” Female Mono Jack
1 ¼” Female Stereo Jack
1 .01μF Axial Capacitors
2 .1μF Axial Capacitor
1 1μF Axial Capacitor
1 12” Piece Wire 22AWG Standard
2 10K ½W 5% Resistors (Brown-Black-Orange)
g
1 82K ½W 5% Resistor (Gray-Red-Orange)
y
g
1 10μF Axial Lead Electrolytic Capacitor
y
1 Aluminum Chassis with Bottom Plate & Screws
1 Piece of Black Tolex
2 Chicken Head Knobs
1 8-Lug/2-Ground Terminal Strip
2 6-32 x 3/8” Philips Machine Screws
2 #6 Lock Washers
2 6-32 Hex Nuts
Required Tools
• Needle-nose pliers
• Diagonal cutters
• Low-power soldering iron
• Electronic solder
• Wire cutters/strippers
• Nut driver set or adjustable wrench
• Philips-head screwdriver
• Small fl at-head screwdriver
• Heatsink
• Small metal fi le
• Ruler