9
10µF 50
V
negative end
1
2
3
black band
Connect a 10uF capacitor from #14 to #19. Be sure to orient the capacitor
so that the negative lead is connected to #19 and the positive to #14.
1
2
3
4
6
7
8
9
C
b
A C
r
Connect a 10uF capacitor from #11 to #22. Be sure to orient the capacitor
so that the negative lead is connected to #22 and the positive to #11.
Strip ½” of insulation off of the end of a piece of wire. First tin then snip the exposed wire from the rest of
the wire. Use this piece to join lug 3 of the left 100KA pot to bottom hole of #17.
Solder both connections
now.
Strip ½” of insulation off of the end of a piece of wire. First tin then snip the exposed wire from the rest of
the wire. Use this piece to join lug 3 of the right 100KA pot to the bottom hole of #24.
Solder both
connections now.
Connect the 2M resistor from #20 to lug 1 of the 100KL pot.
Solder both connections now.
Connect a 240k resistor from #21 to lug 3 of the 100KL pot.
Solder both connections now.
SECTION 4
Please refer to DRAWING 5.
Strip and tin a ¾” piece of wire and connect lug 5 of the footswitch
to the A pin of the footswitch.
Solder both connections now.
Connect an 8.2k resistor from #3 to #13.
Connect a 100k resistor from #6 to #13.
Solder the connection
at #13 now.
Connect the 0.22
µF
capacitor from #2 to lug 1 of the footswitch.
Solder the connection at lug 1 of the footswitch now.
Connect a 47k resistor from #18 to lug 3 of the toggle switch.
Solder the connection at lug 3 of the toggle switch now.
Connect a 47k resistor from #23 to lug 4 of the toggle switch.
Solder the connection at lug 4 of the toggle switch now.
Strip and tin a 1
” piece of wire and connect #18 to lug 2
of the left 100KA pot.
Solder both connections now.
Strip and tin a 1
” piece of wire and connect #23 to lug 2
of the right 100KA pot.
Solder both connections now.
Strip and tin a 2
½” piece of wire and connect the positive lug of DC power
jack to bottom hole at #13.
Solder the both connections now.
Connect a 56k resistor from #7 to #11 using the bottom holes
for both connections.
Solder both connections now.
Connect a 56k resistor from #6 to #10 using the bottom holes
for both connections.
Solder both connections now.
CENTER
PIN LUG
POSITIVE
SWITCH LUG
POSITIVE
LUG
1
2
3
4
5
6
7
8
14
13
12
11
10
9
15
16
18
19
20
21
22
23
24
17
1
2
3
4
5
6