Step 4 – Mount the 9 pin miniature tube socket with its retainer for the EL84
Drawing 2
shows where to mount the 9 pin miniature socket “V2” and its retainer. Make sure that pins 1 & 9
face the “TR1” side of the chassis. (Use #4 hardware).
(2)
(2)
9
Step 5 – Mount both side handles
Mount both handles to the sides of the chassis box using their supplied #8 hardware. (Doing this step will
help you flip the chassis when mounting the two transformers).
.25
"
Mount both side handles.
(4)
(4)
(2)
Step 6 – Mount the Power Transformer (TR1)
Remove the 369EX power transformer from its packaging.
Drawings 2 & 3
show where to mount the power
transformer.
A) Use the first page of the Assembly Drawings, "Primary Wiring Diagrams" to determine which primary
wires you will need to use for your country's mains voltage (100, 110, 120, 200, 220 or 240) and cut off the
unused wires as described in the drawing.
B) Place the transformer on its side and push the wires (one at a time) through their respective grommet holes
as indicated on the drawing.
C) Slowly tilt the transformer upright so that the #10 mounting holes (see drawing 1) line up with the
transformer feet, while continuing to push each bundle of wires through the grommet holes. (Be careful not to
dislodge the rubber grommets).
D) Use #10 mounting hardware to fasten the power transformer in place.
(4)
(4)
(4)