background image

06.01.22, 11:53

Duo X User Guide - MOD Wiki

https://wiki.moddevices.com/wiki/Duo_X_User_Guide

7/11

width: 163 mm
length: 188 mm
height: 63 mm

From the v1.9 onwards the LEDs have smooth transitions between colours. The LED colours represent the following input levels:

Off: below -40dB
Green fade in: between -40dB and -6dB
Green fully ON, fading in yellow: between -6dB and -1dB
Red: between -1dB and 0dB
Blinking strong red: 0dB (CLIPPING!)

Adjusting Volumes

To adjust the Master output volume, press and hold the right endless knob.
This will turn this knob into the master output volume control.

While  pressing,  turn  the  endless  knob  up  and  down  to  adjust  your  master
output volume.

The MOD Duo X also allows each input and output volume to be individually
adjusted.

Please refer to the Inputs and Outputs Device Settings section in the wiki for
more information on that.

Tuning

 

The MOD Duo X has a built-in chromatic tuner that can be accessed on the settings of your device. Both inputs can be used as the tuner input, to
select between them short press the right knob.

If you see a question mark on the tuner screen, it means the MOD Duo X is not receiving any input or the input levels are too low.

Please refer to the Tuner section in the Device Settings page for more information.

Playing

LED Audio meters

Detail of the right display showing the Master Volume

Summary of Contents for Duo X












Reviews: