Mod.Cam MOD.01, User Manual, Page: 8 / 29

Once your device has completed booting it will start flashing orange with all four LEDs,
indicating that it is ready to read a QR code for configuration.
In a browser, navigate to ​ https://setup.modcam.com​ and follow the instructions!
Upgrades
The device upgrades itself over-the-air whenever new software is ready to be deployed to
the device. An automatic update check is performed immediately after acquiring a network
connection and then once every 24 hours. The timeframe for the update check is by default
between 3 and 4 in the morning, local time.
Note:​ Do not shut off the device once it has started upgrading the system, indicated by
spinning red LEDs.
Installation
When the device is ceiling-mounted you can calculate the approximate floor coverage area
A​ for height ​ H​ with the formula:
.78 H A = 1
2
If the sensor has the optional wide angle lens attached, the formula to use is
0.37 H A = 1
2
This means that for a ceiling height of 4 metres, the approximate floor coverage is ~28m​ 2​ ,
or ~166m​
2​
with the wide angle lens.
Applications
For applications running on the MOD.01, please refer to the application-specific
documentation.
>Revision
R3 - 2015-09-14