8VHU0DQXDO
6WLOOR
5
(1*/,6+
,16758&7,216
$&7,9$7('
&+$5&2$/
,167$//$7,21
3285:$7(5
,1727+(
67$,1/(66
67((/7$1.
67$57,1*83
6725(7+(
',67,//('
:$7(5
1. Turn the lid with the hole and separate it from the nozzle/square pouch
(Figure A).
2. Fold the activated charcoal sachet in half and put it into the nozzle and
reassemble the lid.
3. Put the lid with the hole on to the collection bottle, lining it up with the
spout on the distiller (Figure B)
☛
E
ACH ACTIVATED CHARCOAL SACHET CAN BE USED FOR UP TO A
MONTH
).
Figure A
Figure B
Use hot/cold water to fill the tank and make sure that you do not go beyond
the full line. If you use hot water, you can shorten the time needed to distil
water.
Secure the upper cover and plug the power
cord into the socket on the body. Place the
collection bottle and the protective cover in a
secure place and make sure they are leveled.
Plug the power cord into the outlet and turn
on the power switch
☛
WHEN FIRST USED THE SWITCH IS
AUTOMATICALLY SET IN THE
"
ON
"
POSITION
,
SO THERE IS NO NEED TO
SWITCH IT ON FOR THE VERY FIRST USE
.
You will start the process when turn the
switch on and it will shut off automatically at
the end of the process. If you wish to terminate the process, unplug the
power line from the outlet. The power supply is turned off automatically
when distillation is completed. Approximately an hour after you have turned
on the power switch, the distilled water begins to drip down into the
collection bottle. It takes six hours to distil four litres of water. When the
power supply is cut off, you may move onto the next tank immediately.
For proper storage, place the distilled water into sealed containers and
store them in a cool and light-protected room.
Lid
Activated Charcoal
sachet
Nozzle
Body sochet
Power cord sochet
Power cord
Summary of Contents for Stillo
Page 2: ......