1b
Restricted Edge Access
2b
Remove the mounting plate from the unit. Guide
the power cord through the clearance. Install the
unit on the edge of the work surface and make
sure it is fully leveled onto the surface.
Determine the location of the unit on the edge of
work surface.
1" MIN.
Clearance
Wall
Work
Surface
3/4" MIN. to
1-1/2" MAX.
Table thickness
3b
4b
Secure the unit by tightening thumb screws. Plug
the unit into nearby outlet and unit is ready for
use.
Notch
Loosen the thumb screw to install the mounting
plate in the notch at the lower part of the unit.
Thumb
screw
5b
Mounting
plate
6b
Use the optional wire guide to secure the power
cord under the work surface.
Wire
guide
Screw
(OPTIONAL)
Make sure there is a 1-1/2" MIN. clearance for
the mounting plate installation.
1-1/2" MIN.
2021.01.21
2
