Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
2
3
Slide seat board and foot board into slots in the
highchair legs at appropriate heights as required for
child comfort. For babies we recommend the seat on
the 1st or 2nd level down.
Loosely fasten upper and lower backboards to legs
using long screws (B) and bolt nuts (C). Hold nut using a
screwdriver to ensure it is in the right position for screws
and tighten screws with allen key (E).
x4
x4
B
B
C
B
C
C
C
C
B
B
Note:
It is important to ensure that the
foot board is inserted at least three rungs
below the top metal rod.
4
5
IMPORTANT - To ensure the highchair is 100% safe for your child
please read this important information. Start by working in a
methodical manner by tightening the bottom left screw, then
tightening the bottom right screw. Continue in this manner,
alternating from left to right, working your way up to the top of the
Highchair. This will ensure the pieces lock into place and have the
correct tension and the highchair is balanced. Attach the padded
cushions to seat and backboard for added comfort. Enjoy!
x1
Thread safety strap through the opening in the seatboard
and over the safety rail. Pull the strap tight and fold the
velcro flaps over onto the strap to secure it in place.
*Please note - the two small velcro side straps on the
safety strap are only for use when the seat is on the top
two seat levels . This is the recommended seat height for
babies/infants.
Soho Wooden Highchair
Assembly Instructions
5
mocka.co.nz | mocka.com.au