screwdriver required
The best way to clean your highchair – especially the tray is
with a clean damp cloth, and then wipe completely dry.
We recommend you
DON’T
use household cleaners as these
Using a damp cloth and wiping dry will ensure longevity of
your highchair.
To alter the seat and footrest heights after assembly, simply
loosen all the screws in the upper and lower backrests and
the metal rods on both sides of the highchair. Once loosened
this will allow the seat and footrest to be pulled out. Insert into
the new positions and then lock in place by re-tightening all
the screws. Ensure both the seat and footrest are locked into
position and cannot be moved by hand, before placing the
child in the highchair
Thank you!
The Mocka Team
x6
B
A
x4
C
E
D
F
x6
x1
x4
x1
screw
long screw
bolt nut
Allen key
footpad
safety strap
G
H
leg
extender
small screw
x2
15 mm
x2
Hardware Supplied
Pre-installed Hardware
could lift the varnish and upset the wood finish.
Soho Wooden Highchair
2
mocka.co.nz | mocka.com.au
Assembly Instructions