Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
5
6
Flip the unit over so the feet stand on the floor. Attach the magnetic clip
(I) inside the cupboard using screws (G). Check that the door can
swing freely and shut.
Screw hardware (B) into top panel. Place top panel [7] on top of side
panels while sliding the ends of panel (B) into holes. Insert locking nut
(A) and tighten with a screwdriver. Use stickers (J) to cover the holes
where hardware (A) is used.
B
A
x1
G
I
A
x4
7
7
8
Once assembled lift furniture into place, do not drag. Attach the safety
strap (W) to the top of the back side of the unit using screw (Y). Tighten
with a screwdriver.
Move the unit into the desired location up against a wall. Use a drill to
create a small hole lining up with the top of the safety strap (W). Fasten
to wall using wall anchor (X), washer (Z) and screw. Ensure the unit is
balance and steady before use. You’re done, enjoy!
Wall Strap
Y
Y
W
x1
Y
W
W
Z
X
x1
Washer
Strap
wall
anchor
wall
screw
Mocka Essentials 2 Cube
Assembly Instructions
5
mocka.co.nz | mocka.com.au
