1
2
Screw hardware (B) into side panels [1] and [3]. Slide both panels
together with the middle shelf [2], making sure the grooved ends line
up. Insert hardware (A) into the holes on the middle shelf. Tighten (A)
with a screwdriver.
Slide cupboard back panel [4] into groove. Screw hinge pins (F) into the
holes in the cupboard door [5] using screws (H). Lower door pin into hole
in shelf and swing door closed to hold in place.
A
B
B
x4
x4
A
x2
H
F
F
3
1
2
4
5
3
4
Screw in hardware (B) into base panel [6]. Place base panel on top of side
panels while sliding the ends of (B) into the top of the side panels. Ensure
the door hinge pin (F) also fits into the base panel. Insert hardware (A)
into upper holes in the side panels. Tighten with a screwdriver.
Attach feet blocks (D) to base panel using long screws (C) and the
pre-drilled holes in the base panel. Fasten clip plate (E) to the cupboard
door using screws (H).
A
B
C
x2
D
x1
H
E
A
x4
6
3
mocka.co.nz | mocka.com.au
Assembly Instructions
Mocka Essentials 2 Cube
