The DA Series allows full control of aftermarket amplifiers from the factory MOST Bus
head unit, making a convenient and error-free connection with no cutting-and-splicing
of the fibre optic cable. Vehicle owners can then add aftermarket components from a
multi-channel high power amplifier and audio system. The unit also supplies an output
to turn-on aftermarket audio components with a delay. The DA Series purpose is to ensure
the integrity of each system while making the resources available on one side (OEM system)
to the devices on the others side (Aftermarket system).
The DA Series extracts 20 Hz to 20 kHz of audio output via either 2 channel TOSLINK
Digital output (DA1) or 8 channels of analogue audio output at 4V RMS (DA2), and allows
full control from the factory radio of the aftermarket car audio system including volume,
fader,balance, bass, treble and graphic equalizer where supported (e.g. BMW).
The preamp stage of the DA2 is driven by Burr Brown DAC converter that give to the
customer an audiophile quality without any compromize. Moreover the Blackfin Processor
gives to DA Series capability to introduce powerfull Audio processing features.)
to mObridge Pre-amp Technology
Welcome
Features of Your DA1 mObridge Unit
EXTERNAL DSP /
AMPLFIER COMBINATION
The picture above is a graphical representation of
the product. Individual configuration may differ
VEHICLE HEAD-UNIT
BASS SPEAKERS
FRONT SPEAKERS
FRONT SPEAKERS
REAR SPEAKERS
MOBRIDGE FEATURES
MOBRIDGE DA1 FEATURES
PAGE 03
