No.
Connector
Definition
7
Reset Button
Press the button with a proper tool for at least 20 seconds to restore
the system.
8
SD Card Slot
Insert the SD card into the card slot to store videos and snapshots. Do
not remove the SD card when the camera is powered on.
*Contact the manufacturer for a compatible BNC cable.
**Do NOT connect external power supply to the alarm I/O connector of the camera.
NOTE!
n
To purchase a power adapter, please contact MOBOTIX for further information.
n
The DC12V power jack and the AC24V power connector cannot be used at the same time
without causing unforeseeable damage.
microSD Card Slot/Reset Button
The positions of microSD card slot and default button are shown in the figure above.
microSD Card Slot
Insert the microSD card into the card slot to store videos and snapshots. Do not remove the
microSD card when the camera is powered on.
NOTE!
It is not recommended to record with the microSD card for 24/7 continuously, as it may
not be able to support long-term continuous data read/write. Contact the manufacturer of the
microSD card for information regarding the reliability and the life expectancy.
Reset Button
Press the default button with a suitable tool for at least 20 seconds to restore the system.
Power Connector
Pin
Definition
1
AC24V L
2
GND
3
AC24V N
Camera Cabling
Power Connection
To power up the camera, connect the DC12V or AC24V power adaptor to the power connector of the
camera and the power outlet. Refer to the diagram and pin definition below for AC24V power con-
nection.
Quick Installation 2MP Speed Dome Low Light Camera
3 / 9
