(4) Secure the ribbon cables using the cable clamps
To do so, gently squeeze the clamps between your fingers and insert the
clamps into their seats along the inside of the dome's rim. Make sure that
the pin of each clamp is properly positioned in the corresponding hole of the
camera hou-
sing.
(5) Mount the dome
Take a cotton cloth,
insert the dome into the
housing with the mark pointing towards the
camera's PIR sensor
and tighten the dome in
clockwise direction
. This will prevent acciden-
tal repositioning of the lenses through the rest
of the mounting process.
Important:
Always insert the dome into the
housing with the mark of the dome pointing
towards the camera's PIR sensor, in order to
preserve the camera's weatherproofness!
Note:
The camera comes with an additional
tinted dome!
(6) Adjust the lenses and install the outer shell
For additional information on this topic, see section 2.13,
Finishing the Instal-
lation.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
44
/124
D12 Camera Manual Part 1
Press clamp together cau-
tiously, then insert into
the seats; make sure the
pin fits snug into the hole!
Align the
mark
of the
dome with the PIR sensor
Tighten the dome by turn-
ing
clockwise
Pin
