8
Outdoor Industrial Router
3. Plug the Ethernet cable into the RJ-45 connector and tighten the cable gland to ensure the seal is adequate.
Use a shifter or spanner to ensure IP67 rating.
Connecting the Ferrite Core
1. After connecting the Cable Gland you now have to connect the Ferrite Core.
2. Locate the end of the black Ethernet cable with the cable gland and make a loop in the cable,
approximately 8 cm in diameter.
8 cm
3. Open the Ferrite Core and place the part of the cable that overlaps into the centre.
4. Close the Ferrite Core and ensure that the clips click together to hold the Ferrite Core closed.